AASHIE N HOME’S 10g Grey Heat Sink Compound Thermal Silicon Conductive Grease Paste for PC CPU GPU Chipset Ovens Cooling (SET OF 2)

Price: ₹249 - ₹179.00
(as of Apr 20, 2025 17:40:33 UTC – Details)

Product Description

10g Grey Heat Sink Compound Thermal Silicon Conductive Grease Paste for PC CPU GPU Chipset Ovens Cooling

Thermal Grease Paste Compound Silicone for CPU Heat Sink

10g Grey Heat Sink Compound Thermal Silicon Conductive Grease Paste for PC CPU GPU Chipset Ovens Cooling

Thermal coupling of electrical / electronic device to heat sinksHigh Thermal Conductivity:; Low Bleed and Stable at high temperature

Spescifications

Nano particle structure

Fine-grained aluminum and zinc oxide contained in the paste interpolate the slight unevenness of the heat medium such as CPU and the heat sink, achieving excellent thermal conductivity.

Stability

A special compound that does not dry at a high temperature of 80 ° C is used to maintain stable properties without curing for a long time.

Non-conductive

There is no concern about shorts due to non-conductivity.

How to Use

Clean the object and heat sink surfaces

Wipe the surface lightly with a cotton ball or cotton swab dampened with isopropyl alcohol. The higher the percentage of alcohol the better. 70 percent is good but 90 percent is better (if you can find it).

Sand the heat sink and object surfaces if necessary

Thermal paste is designed to fill in the gaps and imperfections on the surfaces that you are joining. Since modern production techniques cannot make surfaces without imperfections, thermal paste will always be necessary.

How to Apply Thermal Paste

The lines method – Place two thin lines of thermal compound on the base of the cooler. The lines should be parallel and spaced so that they are each placed a third of the width of the processor. The lines themselves should also be about a third of the processor’s width in length.The cross method – This is very similar to the previous method, but the lines are crossed in an “X” pattern instead of parallel. The length and thickness of the lines should be the same as the previous method.The spread method – This is one of the most popular and effective methods, but takes a little more effort. Place a small amount of thermal paste onto the base of the cooler. Using a plastic finger protector or a plastic bag, use your finger to spread the paste evenly across the surface. Make sure to cover the entire surface that will be in contact with the processor, and ensure that you do not apply the paste too thick. In most cases, the paste should barely hide the metal underneath.

? HIGHLY EFFICIENT HEAT CONDUCTIVITY – silicone grease is an exceptional thermal conductive material, which is perfect for cooling CPU or other electronic components. It can be applied between CPU and heat sink for heat dissipation to maintain the temperature stability and prevent components damaging